From the inside of the tower, center Sunlight Window flat in opening as shown.
Secure with #8 x
⁵⁄₈
" truss head screws.
Items for
STEP 1
:
(1) Sunlight Window
(16) #8 x
⁵⁄₈
" truss head screws
SUNLIGHT WINDOW ASSEMBLY - BIY
Front View
Inside View
SAND BOX SEAT
Position sand box seat as shown and mark holes.
Drill
¹⁄₈
" holes 1" deep into the board. Attach with
#14 x 1
¹⁄₄
" pan head screws.
Items for
STEP 1
:
(1) Sand Box Seat
(4) #14 x 1
¹⁄₄
" pan head screws
17
STENCIL SET INSTRUCTIONS
1. Separate stencil strips into individual letters (fold at perforation to make separating letters easier). Keep letters
organized in alphabetical order and remove the center of each letter.
2. A permanent marker (purchased separately) will work well for this project.
3. Test stencil your name or message on a piece of paper. Draw a bottom guideline
on the paper. Stencil one letter at a time, starting with the first letter of the word.
Space each of the following letters by placing the left edge of the stencil so it
touches or slightly overlaps the previous letter.
4. Use our stencil test sheet to aid in the aligning your name or message on the
supplied activites in your playset.
5. When you stencil on a supplied activity, align each stencil with the bottom edge.
Lightly tape to hold stencil in place. Stencil each letter following the same
procedure as you did on the test sheet. After stenciling all the letters, leave gaps
in the letters open or fill in with the marker for your desired look.
Guideline
Gap
Left edge of Stencil
