8
TEMPLATE FOR DRILL HOLES
Be sure boards/brackets are tight against each other.
0
Be sure boards/components are spaced the distance listed.
Z
/
,
Do not _______.
Be sure boards are flush.
Be sure to equally space.
This helps with assembly process.
Make sure boards remain square.
Note: Assembly process should take place on flat surface.
Helpful Hints
Be sure boards rest on the ground.
Playstar Logo showing:
Use tabs to square on
corner of board.
Arrow showing:
Use tabs to slide along edge
of board to drill location.
There is a rigid version of this template in hardware bag.
Use
only to mark boards. Do not drill through template.
Summary of Contents for MESA Bronze
