2
Check the lock nut and bolt on the swing seat to
make sure that they are secure.
Part Ref. #: PSSH11, PSHW13
SLIDE ASSEMBLY
Required Parts:
Slide x1
Rail/Ladder Leg x2
Front Leg x1
Ladder Step x2
Link Bar x2
Proper
Placement:
Slide Assembly
Correct Location
Incorrect
Location
Pre-Assembled Parts:
•
The screws and bolts for the slide rail/ladder legs are inserted on the slide. They will need to be removed prior to
inserting the legs into the slide.
•
The ladder steps should have screws and nuts installed. These will need to be removed prior to inserting the legs and
then reassembled with the head of the screw facing out.
Step Illustration
Instructions
Hardware
Reference
1
Remove the screws, washers, and lock nuts from
the holes in the slide.
Part Ref. #: PSHW24
9
©
2006 Pacific Cycle, Inc.
