Playnation 1500CWF, Assembly Instruction Manual

Page: 159 / 163

STEP 7: WALL PANEL BOARDS
1: MOUNT THE 1 X 4 X 20.25" WALL PANEL BOARD ABOVE THE PLAYSET CENTER POST. THE END WITH TWO
PRE-DRILLED HOLES SHOULD BE OFFSET TO THE TOP. MAKE SURE IT IS STRAIGHT VERTICALLY AND FASTEN
IT TO THE SUN SUPPORT USING TWO #8 X 1-1/2" WOOD SCREWS.
2: MOUNT ONE 1 X 4 X 20.50" WALL PANEL BOARD ON EACH SIDE OF THE CENTER BOARD PREVIOUSLY
INSTALLED. THE BOTTOM END MUST BE 28-1/2" FROM THE TOP OF THE PLAY SET DECK BOARDS. FASTEN IT
TO THE SUN SUPPORT AND REAR PANEL SUPPORT USING TWO #8 X 1-1/2" WOOD SCREWS ON EACH
END PER BOARD.
3: MOUNT THE 1 X 2 X 9.88" WALL PANEL BOARD HORIZONTALLY ABOVE THE PLAY SET CENTER POST
CENTERED BETWEEN THE WALL PANEL BOARDS PREVIOUSLY INSTALLED, FASTEN USING SIX #8 X 1-1/4"
WOOD SCREWS.
4: MOUNT THE 1 X 3 X 11.50" WINDOW TOP/BOTTOM USING THE
DIMENSIONS SHOWN IN THE DIAGRAM. MAKE SURE THE
PRE-DRILLED HOLES ARE OFFSET UP ON THE TOP BOARDS,
AND OFFSET DOWN ON THE BOTTOM BOARDS. FASTEN USING
TWO #8 X 1-1/2" WOOD SCREWS PER BOARD.
5: MOUNT THE 1 X 4 X 21.75" WALL PANEL BOARD NEXT TO THE
WINDOW TOP/ BOTTOM BOARDS, FOLLOW THE DIMENSIONS
SHOWN IN THE DIAGRAM. FASTEN IT USING FOUR
#8 X 1-1/2" WOOD SCREWS PER BOARD.
(1)
REAR PANEL SUPPORT
PLAYSET CENTER POST
ASSEMBLY)
(1)
PANEL BOARD
WALL
1 X 2 X 9.88"
(2)
PANEL BOARD
WALL
PANEL BOARD
WALL
1 X 4 X 20.50"
1 X 4 X 21.75"
(2)
ROOF BATTEN
PLAYSET ROOF SUPPORT
PANEL BOARD
WALL
1 X 4 X 20.25"
(4)
TOP / BOTTOM
WINDOW
1 X 3 X 11.50"
ROOF SUPPORT
(ROOF SECTION
PLAYSET DECK BOARDS
28 2
14"
"
14"
1
11 58 "
#8 X 1-1/4" WOOD SCREW
#8 X 1-1/4"
WOOD SCREW
1 X 2 X 9.88" WALL PANEL BOARD
23