EN
37
1
1
3
3
2
2
4
4
5
Plastic cover
Plastic cover
Rear View
NOTE
:
If you need side wheels when using this product, please assemble them as
follows. Keep the removed plastic covers for future use. As the child grows up, if the
side wheels are no longer needed in the future, please replace the plastic cover back.
1.
Use two socket wrenches to remove the locknuts,
Ø12 washers and plastic covers on both sides of rear
axle.
2.
Fit the side wheels to the both sides of the rear axle.
3.
Slide a Ø12 washer to each side of the rear axle.
4.
Use two socket wrenches to tighten a locknut to
each end of the rear axle.
5.
Turn the product on its side. Tighten two Ø4x12
screws from the bottom of each side wheel.
ATTACH THE SIDE WHEELS
