Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
TWISTER SLIDE
Rev F
9/17/2009
1710
Page 5 of 5
Specifications
TWISTER SLIDE - SINGLE
Part #
DESCRIPTION
QTY.
DE-4339-ENT
Twister Slide - Entry
1
DE-4339-EXT
Twister Slide - Exit
1
DE-4339-L
Twister Slide - Left
Varies
DE-4339-R
Twister Slide - Right
Varies
DE-4339-S
Twister Slide - Straight
Varies
FS-1701
Single Slide Leg
1
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
4
9103122-TR
Bolt Button Head 3/8" x 2-3/4"
4
9123032
Bolt Hex 3/8" x 3/4"
4
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
16
9413002
Nut Lock 3/8"
4
EACH SECTION JOINT
Part #
DESCRIPTION
QTY.
9103082-TR
Bolt Button Head 3/8" x 1-3/4"
5
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
5
EACH MID-SUPPORT
Part #
DESCRIPTION
QTY.
BE-4500
Sectional Slide Support Bracket #2
1
FS-1710-S
Sectional Slide Support
1
9103052-TR
Bolt Button Head 3/8" x 1"
2
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
4
9413162-BLK
Nut Lock 3/8" w/ Black Cap
2
TWISTER SLIDE - CANADA SINGLE
Part #
DESCRIPTION
QTY.
DE-4339-ENT
Twister Slide - Entry
1
DE-4339-EXT
Twister Slide - Exit
1
DE-4339-L
Twister Slide - Left
Varies
DE-4339-R
Twister Slide - Right
Varies
DE-4339-S
Twister Slide - Straight
Varies
FS-1701
Single Slide Leg
1
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
4
9103092-TR
Bolt Button Head 3/8" x 2"
4
9123032
Bolt Hex 3/8" x 3/4"
4
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
16
9413002
Nut Lock 3/8"
4
TWISTER SLIDE - TRIPLE
Part #
DESCRIPTION
QTY.
DE-4339-ENT
Twister Slide - Entry
3
DE-4339-EXT
Twister Slide - Exit
3
DE-4339-L
Twister Slide - Left
Varies
DE-4339-R
Twister Slide - Right
Varies
DE-4339-S
Twister Slide - Straight
Varies
FS-1701
Single Slide Leg
3
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
12
9103122-TR
Bolt Button Head 3/8" x 2-3/4"
12
9123032
Bolt Hex 3/8" x 3/4"
12
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
48
9413002
Nut Lock 3/8"
12
TWISTER SLIDE SECTIONS:
Shall be constructed of UV-stabilized rotationally
molded linear low density polyethylene with an
average wall thickness of .250".
TWISTER SLIDE SUPPORT:
Shall be fabricated of 1.660" O.D. 11 gauge steel
tubing welded to a 3/16" formed and punched
steel plate. Twister Slide Support has a
multi-stage baked-on powder coat finish.
SINGLE SLIDE LEG:
Shall be fabricated of 1.660" O.D. 11 gauge steel
tubing welded to a 10 gauge steel plate. The
Single Slide Leg has a multi-stage baked-on
powder coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Step 8
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 9
Plumb and level entire component. Pour concrete
into footing holes. Allow at least 72 hours to cure
before using this equipment. (See Notes B and E)
Step 10
Place appropriate compliant protective surfacing
under and around Twister Slide. (See Note D)
Parts List
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance
