Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
R3.5 WALL ASSEMBLY
INSTALLATION INSTRUCTIONS
Rev E
10/13/2014
R3.5-1301
Page 4 of 4
DECK MOUNT WALL
Part #
DESCRIPTION
QTY.
BE-0361-L
R35 Panel Bracket - Left
1
BE-0361-R
R35 Panel Bracket - Right
1
GG-8113
Mounting Lug R3.5
2
HS-1001-R35
Socket Clamp Set R3.5
2
Varies
R3.5 Wall
1
9103052-TR
Bolt Button Head 3/8" x 1"
4
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
2
9143062-TR
Bolt Shoulder 3/8" x 1-3/8" BH
2
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
8
9345002
Washer Flat SAE 1/2"
6
9413002
Nut Lock 3/8"
2
9443022-TR
Nut Barrel 3/8" x 5/8" BH
4
POST MOUNT WALL
Part #
DESCRIPTION
QTY.
GG-8113
Mounting Lug R3.5
4
HS-1001-R35
Socket Clamp Set R3.5
4
Varies
R3.5 Wall
1
9143062-TR
Bolt Shoulder 3/8" x 1-3/8" BH
4
9345002
Washer Flat SAE 1/2"
4
TALL DECK MOUNT WALL
Part #
DESCRIPTION
QTY
BE-0361-L
R35 Panel Bracket - Left
1
BE-0361-R
R35 Panel Bracket - Right
1
GG-8113
Mounting Lug R3.5
4
HS-1001-R35
Socket Clamp Set R3.5
4
Varies
R3.5 Wall
1
9103052-TR
Bolt Button Head 3/8" x 1"
4
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
2
9143062-TR
Bolt Shoulder 3/8" x 1-3/8" BH
4
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
8
9345002
Washer Flat SAE 1/2"
8
9413002
Nut Lock 3/8"
2
9443022-TR
Nut Barrel 3/8" x 5/8" BH
4
TALL POST MOUNT WALL
Part #
DESCRIPTION
QTY
HS-1001-R35
Socket Clamp Set R3.5
6
GG-8113
Mounting Lug R3.5
6
Varies
R3.5 Wall
1
9143062-TR
Bolt Shoulder 3/8" x 1-3/8" BH
6
9345002
Washer Flat SAE 1/2"
6
R3.5 WALL:
Shall be made from high-density, 3/4" thick,
hot extruded polyethylene sheet plastic specially
formulated for optimum UV stability and color
retention.
R3.5 PANEL BRACKET:
Shall be precision cut from 3/16" HR sheet steel.
The R3.5 Panel Bracket shall have a multi-stage
baked-on powder coat finish.
SOCKET CLAMPS:
Shall be two-part and precision die-cast from a
high strength aluminum alloy. The Socket Clamps
have a multi-stage baked-on powder coat finish.
MOUNTING LUG:
Shall be precision die-cast from a high strength
aluminum alloy. The Mounting Lug shall have a
multi-stage baked-on powder coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Parts List
Specifications
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance
