For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
POLY WAVE SLIDE - CANADA
Rev B
7/18/2009
1704-CAN
Page 4 of 5
POLY WAVE
Deck
Button Head Bolt
3/8" x 2-1/4"
Lock Nut
3/8"
SLIDE
3/8" x 1" O.D.
Washer
SINGLE SLIDE
SPACER
SINGLE
SUPPORT
SLIDE
Button Head Bolt
3/8" x 3/4"
Washer
3/8" x 1" O.D.
Hex Bolt
3/8 x 3/4"
Washer
3/8" x 1" O.D.
SLIDE LEG
POLY WAVE
SLIDE
Figure 1.1
Step 5
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 6
Plumb and level entire component. Pour concrete
into footing hole. Allow at least 72 hours to cure
before using this equipment. (See Note B and E)
Step 7
Place appropriate compliant protective surfacing
under and around Poly Wave Slide. (See Note D)
Step 2
Attach the Slide Sit Down Wall to the deck and posts.
(See Note C)
Step 3
Attach the Slide Support and the Single Slide Leg to the
Poly Wave Slide as shown in Figure 1.1. (See Note A)
NOTE: Slide Support is for 60" and 72" Poly Wave
Slide only.
Step 4
Place the Poly Wave Slide in the footing hole(s) and
attach the Poly Wave Slide and Singe Slide Spacer to
the deck as shown in Figure 1.2.
(See Note A)
Figure 1.2
