5
2. Using bolts
H1
and washers
H3
attach legs
P2
to
Shuffleboard
P1
.
Figure 1
3. Attach the leg panels
P3
to the legs
P2
using bolts
H2
and washers
H4.
4. Screw leg levelers
P4
into the bottom of each legs
P2
.
Figure 2
1. Find a clean, level place to begin the assembly of your suffleboard. We recommend
building the suffleboard on the box top to protect the parts during assembly
.
6
5.Attach the abacus scorers
P5
to the side panels using screws
H5
Figure 3
!
WARNING
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON ITS LEGS.
MAKE SURE YOU DO NOT USE THE LEGS FOR LEVERAGE AS YOU
ROTATE THE TABLE. BE CAREFUL, THE TABLE IS VERY HEAVY.
Turn the table over and place it in the intended setup location. Using
a carpenters level, level the table by turning the leg levelers P4. Start by
adjusting the lowest corner first and then work your way around the table.