For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
DOUBLE SIT DOWN SLIDE HOOD
Rev A
10/10/2009
R5-1306
Page 2 of 3
Step 1
(Factory Assembled)
Attach Sit Down Hood Bars to the Slide Hood as
shown in Figure 2.
Step 2
Locate and attach collars at the height shown in Front
Elevation (See Note B).
* Height shown from top of collar to top of deck
Step 3
Insert the Double Sit Down Slide Hood into the Slide
and attach Double Sit Down Slide Hood to collars as
shown in Figure 1.1 (See Note B).
Step 4
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
FRONT ELEVATION
39"
*
991mm
1/4"x 1-1/4" BH TR
Tek Screw
1/4" x 1" OD
Fender Washer
SLIDE HOOD R5
SIT DOWN HOOD BAR
FIGURE 2
SLIDE HOOD R5
SOCKET CLAMP
TOP
SOCKET CLAMP
BOTTOM
Figure 1.1
