Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
DOUBLE SIT DOWN R5
Rev E
5/26/2009
R5-1305
Page 2 of 2
39"
Top of Collar to
Top of Deck
991mm
SIDE VIEW
BOTTOM
Figure 1.1
CLAMP TOP
SOCKET
SOCKET
CLAMP
SIT DOWN BAR DBL. (R5)
Specifications
Parts List
Part #
DESCRIPTION
QTY.
Varies
Sit Down Bar Dbl. (R5)
1
HS-1001-R5
Socket Clamp Set R5
2
DOUBLE SIT DOWN:
Shall be fabricated from 1.315" O.D. 12 gauge steel
tubing welded to a 1.029" O.D. 14 gauge steel
extender. Double Sit Down shall have a multi-stage
baked-on powder coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Step 1
Attach Double Slide to deck. (See Note B)
Step 2
Loosely attach collars to posts at height shown in
Side View. (See Note B)
Step 3
Insert ends of Double Sit Down into Double Slide
as shown in Figure 1.
Attach Double Sit Down to collars as shown in
Figure 1.1. (See Note B)
Step 4
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance
