9/ 26/ 2008 11: 01: 05 AM, Rachel
Page 1 of 3
IMPORTANT NOTES: Read First
Assembly View
Elevation
End View
(A)
Use liquid thread lock (such as Loctite
®
) with all threaded hardware.
Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B)
For installation of Ramps over hard surfaces (i.e. concrete sidewalks, slabs, etc.) firmly attach
bottom edge of Ramp (Half) using bolts and anchors. Concrete must be allowed to cure completely before using
the equipment (at least 72 hours).
(C)
The hardware shown in Figure 3 is the recommendation from the manufacturer and the concrete anchors are
not included with the Equipment. This Figure is provided to show recommended installation of hard surface
mounted Ramps.
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
ACCESS RAMP, BORDER TIMBERS and CONNECTORS
1205
Rev A
See Figure 2
Border Timber to Ramp
Assembly Connection
See Figure 1
Ramp Halves Connection
See Figure 4
Hard Surface Connection
Hard Surface Mount Diagram
Top View
RAMP HALF
(Top)
RAMP HALF
(Top)
Drill 3/8"Ø Holes in
Ramp, Mark Concrete
4 Pl. each Ramp (Half)
See Figure 3
Border Timber to Border
Timber Connection
