6" min.
Surface Mounted
Post
4" min.
Anchor Bolt
RECYCLED AND STEEL POST SURFACE MOUNT INSTALLATION PROCEDURES
Step 1:
Standard height for Surface Mount Posts is 34". Steel Post height can not be adjusted. The Recycled Posts may be modified in the field to the
following heights: (
Ages 3-5, 20"
) (
Ages 5-7, 25"
) (
Ages 7-11, 30"
) (
Adult, 34"
)
Step 2:
Determine installation location. Verify concrete footing is a minimum of 6" thick. If the concrete pad is at an angle, steel washers are required to act
as shims. (Shims not provided)
Step 3:
Stand the surface mount post upright onto the concrete pad. Mark the center of the holes on the surface mount plate. After you have made your
marks, set aside the post in order to drill for anchor holes. With a hammer or rotary drill, drill through concrete at marked locations. Drill to a
minimum depth of 4". A 3/8" masonry drill bit will be needed.
Step 4:
Place the surface mounted post back over the drilled out holes. Insert provided anchor bolts into aligned holes. Position anchor nut so that it is flush
with the top of the bolt. Pound anchor bolts into the hole until the anchor washer is flush with the post base. Tighten anchor bolts until they are snug.
Cover remaining bolt sections with provided plastic caps.
Step 5:
Verify the correct placement, levelness, plumbness, and finished height of the instrument. Also check for sufficient clearance around the instrument.
A 36" radius is recommended around the instrument for wheelchair accessibility, however this is not required for instrument function. Instrument may
be installed next to a wall or in a variety of different configurations.
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
FREENOTES HARMONY PARK IS
PROHIBITED.
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: (970) 375-7825
FAX: (970) 247-0856
EMAIL: [email protected]
WWW.FREENOTESHARMONYPARK.COM
SHEET 5 OF 5
Aria 2017 - Installation Guide
SCALE: 1:6
REVISION: A
