www.dero.com | 1-888-337-6729
© 2015 Dero
Place the Uprights 48” apart from each other. See
your rack layout for location and numbers.
A) For single-sided units, fasten the Upright
Braces to the Uprights with 3/8” x 3” bolts, 3/8”
washers, 3/8” lock washers, and 3/8” nuts.
B) For double-sided units, fasten the Double-
sided Uprights and Upright Braces to the
Uprights with 3/8” x 3” bolts, 3/8” washers, 3/8”
lock washers, and 3/8” nuts.
Anchor each Upright by drilling 3/8” holes and
fastening with wedge anchors.
1
3a
3b
2
INSTALLATION NOTES
Before installing: Make sure the floor is strong enough to
accommodate the rack fully loaded with bikes. Compare parts
shipped with rack to parts list. Call Dero if any parts are missing.
TOOLS NEEDED
9/16” wrench/socket
¾” wrench/socket, qty. 2
3/8” masonry bit
Tape measure
Drill (hammer drill recommended)
Hammer
Level
BIKE FILE
Installation Instructions – Floor Mount
