©2021
Installation
In-Ground Mount : Existing Concrete
Round
Rack
TOOLS NEEDED
Level
Cement mixing tub
Shovel
Access to water hose
Fill holes with Super Por-Rok or epoxy grout.
An easy way to brace the rack while the grout sets is to bolt two
1x4” boards together at one end and clamp them onto the legs
of the rack like a clothes pin.
Core holes no less than 3” diameter (4” recommended) and no
less than 10” deep into sidewalk.
Place rack into holes, making sure it is level until the grout has set.
1
3
2
Trowel
Hole coring machine with 4” bit
Materials to build brace (see “Install Tip” at bottom of page)
TIP
Ø 3” min.
10” min.
