Playcore CoLorado TIME SYSTEMS Slim Pace Clock User Manual Download

Page: 2 / 14

Manufacturer:

Everlast Climbing Industries, Inc.

DBA Colorado Time Systems

1551 East 11th Street

Loveland, CO 80537 USA

Sales: 800-279-0111 or +1 970-667-1000

Service: 1-800-287-0653 or +1 970-667-1000

Service Fax: +1 970-667-1032

Web: www.coloradotime.com

Email: [email protected]

Product Identification

Product: Slim Pace Clocks

Model Numbers: MS-0037 through MS-0040

Power Specification

150W power supply: 100-240V, 50/60Hz, max 2A

Information in this manual is subject to change without notice. Pictures and illustrations

may not accurately depict your version. Please check our website for the most current

information; our user manuals are available online in the customer service section of our

website.

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Contains FCC ID: OUR-XBEEPRO

Model Xbee-PRO Radio IC 4124A-XBEEPRO

Part Number F972, Rev. 202007

Summary of Contents for CoLorado TIME SYSTEMS Slim Pace Clock















Search results

Summary of Contents for CoLorado TIME SYSTEMS Slim Pace Clock

Reviews:

Related manuals for CoLorado TIME SYSTEMS Slim Pace Clock

Brands by name

Popular brands

Playcore CoLorado TIME SYSTEMS Slim Pace Clock, User Manual

Search results

Summary of Contents for CoLorado TIME SYSTEMS Slim Pace Clock

Reviews:

Related manuals for CoLorado TIME SYSTEMS Slim Pace Clock

Brands by name

Popular brands