SPA-8 User Manual
11
SPECIFICATIONS
Abbr.
Name
Value
Units Condition
THD+N Total Harmonic Distortion
plus noise
0.0004
%
20Vrms out, 1 kHz, no load
BW 22 Hz - 22 kHz, (A-weighted)
SNR
Signal-to-Noise Ratio
93
dB
2.83Vrms out,
BW 22 Hz - 22 kHz, (A-weighted)
DNR
Dynamic Range
119
dB
57.8 Vrms out, no load,
BW 22 Hz - 22 kHz (A-weighted)
BW
Frequency Response
0 / -3
dB
10 Hz / 100 kHz
2.83Vrms out, no load
X-Talk
Crosstalk
<-120
dB
26.5 Vrms out, 1 kHz
BW 22 Hz - 22 kHz (A-weighted)
Left-to-Right/Right-to-Left
Zout
Output Impedance
<0.2
Ω
Unbalanced (0Hz to 20kHz)
Maximum Output Power
per Channel
1600
W
Continuous Peak
into 4 Ohm
Maximum Output Level
37.4
57.8
163.4
dBu
Vrms
Vpp
Unbalanced, no load
BW 22 Hz - 22 kHz
THD+N 1%
Gain
30.7
dB
Balanced to Unbalanced
Standby Power
<1
W
switched to standby
Power Factor 45
Power Consumption
300
W
switched on, no load
Power Factor 61
Maximum Power Consumption
5750
W
switched on, 2 Ohm load
230VAC Mains, short term <1min
Dimensions
73 x 87 x 34
29 x 34 x 14
cm
inch
Width x length x height
Weight
137
292
kg
lbs
Shipping weight
182
400
kg
lbs
All specifications are taken at 230V AC mains.
CLEANING THE CHASSIS OF THE SPA-8
It is possible that the chassis can stain slightly from fingerprints or you may discover subtle stains on the
surface that can be caused by the packaging material during shipping. You can easily clean the chassis with
either window cleaning solution and a clean and soft cloth. The best way is with a micro fiber cloth that you
spray slightly with WD-40. Do not spray it directly on the chassis, but rather on the cloth. Then gently rub the
entire chassis until it is dry again.
Summary of Contents for SPA-8
Page 1: ...Version 1 0 SPA 8 Stereo Power Amplifier USER MANUAL ...
Page 2: ......
