MPD-6 User Manual
4
Playback Designs products are sold worldwide through authorized dealers with restricted territories. If any
Playback Designs product is purchased from non-authorized dealers or from a dealer selling outside his / her
authorized territory all warranties will be void.
If you purchased this product from a dealer please take a moment and send us an email to
so we can register you for the warranty. If this product has been shipped to you
directly from Playback Designs you are automatically registered.
BEFORE USING THE PRODUCT
What is in the box:
MPD-6 playback system
Remote control unit with installed batteries
Power cord (100-120V countries only)
User manual
Registration
Please take a moment and send us an email to
so we can register you for the warranty.
Installation:
Before connecting your MPD-6 to the AC mains, make sure you select the
correct voltage on the rear panel (100V, 120V or 230-240V).
Operating this machine at the wrong AC voltage will cause serious
damage.
Do not place the MPD-6 over an amplifier or any other equipment that
generates heat.
As this product may become warm during operation, always leave
sufficient space around the MPD-6 for ventilation. Always allow adequate
air circulation around the product.
!
Before connecting the MPD-6 to AC power make sure you select the correct voltage for
your country on the Voltage Selector switch located on the rear panel.
