background image

4

1

3

2

1

2

2

3

3

1

5

4

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

Hole in the 
front axle linkage

Attach the Steering Column  

  12

R/C type

    Turn the vehicle body on its side. Remove the 

M5x22 machine screw

 and 

Ø5 

nut

 from the 

R/C driver

 with a screwdriver. 

1. Attach the 

R/C driver

 to the 

steering gear box

, and make it match with 

steering gear box.

2. Insert the 

straight end of steering column

 up through the 

hole in the R/C 

diver, the hole in the steering gear box

 from the bottom side, and out 

through the 

hole in the dash

.

3. Line up the 

holes in the R/C driver

 and the 

hole in the steering column

tighten a 

M5x22 machine screw

 and 

Ø5 nut 

back in the same location with a 

screwdriver.

4. Insert the 

bent end of steering column

 through the 

hole in the front axle 

linkage

.

5. Fit a 

Ø

10 washer

 to the steering column.

6. Insert a 

split pin

 into the hole in the steering column, bend the ends of split pin  

back using 

long nose pliers

.

Steering Gear Box

Summary of Contents for MINI Hatch





























Reviews: