Page7
Stopping/Braking
1. To brake, release the THROTTLE GRIP and depress the BRAKE LEVER (on the left
side of the handlebars. Depressing the brake will disengage power to the motor.
When the unit feels like it is loosing power or not accelerating to full speed, the scooter
is ready to be re-charged.
BRAKING SYSTEM
The ELECTRIC SCOOTER uses a hub brake system on the rear wheel. A hand brake
lever on the left side of the handlebar activates the brakes. Squeezing the hand brake
lever with your left hand will activate the rear brake. Make sure to release the HAND
THROTTLE GRIP when engaging the brakes.
Practice braking on a smooth, dry surface to get used to the feel of the braking system.
Braking distance is affected by wet conditions and loose and uneven riding surfaces.
Adjusting the Brakes
The Brakes on the ELECTRIC SCOOTER should come fully adjusted from the
factory.
However, it may be necessary to adjust the brakes from time to time.
Squeaky Brakes
The brakes may squeak before they are broken in. This is normal and will not
affect the function or performance of the brakes. With continued use the
squeak should go away.
MAINTENANCE
RECOMMENDED TOOLS
To adjust the rear brakes:
For brakes that are adjusted too tight
1. Loosen the tension screw on the left
hand brake lever by rotating it
counter-clockwise until the wheel
spins freely.
For brakes that are adjusted too loose
1. Tighten the tension screw on the left
hand brake lever by rotating it
clockwise until the wheel has a slight
drag.
For further adjustment, locate the
adjustment screw on the rear brake hub
located on the rear wheel.
Summary of Contents for 2015 Electric Scooter
Page 1: ...Page1 Electric Scooter Owner s Manual New ...
Page 2: ...Page2 ...