Gas Hob
User Manual
Page
7
Operating Instructions
IMPORTANT //
To ensure best performance,
avoid risk of damage or accident. Please read
the operating instructions prior to first time use.
This appliance is supplied with a spare data plate
label. Please attach it to an adjacent surface for
future reference if the labels on the base of the
cooktop are not visible after installation.
NOTE //
The metal components have a
protective coating, which may give off a slight
smell when heated up for the first time. This
smell and any vapours given off do not indicate
a faulty gas connection or appliance nor are
they health hazardous.
The burners differ in size and power. Choose
the most appropriate burner for the diameter
of the cookware being used as specified on
the table below:
PAN SIZES
BURNER
min diameter
(mm)
max diameter
(mm)
Auxiliary
120
180
Semi-Rapid
180
200
Rapid
180
220
Wok
220
260
The position of the corresponding gas burner is
indicated on each control knob.
1. Control knobs
The control knob is used to ignite the burner
and regulate the strength of the flame.
The gas supply is turned off
Ignition candle
Strongest flame
Weakest flame
Respective burner
ATTENTION //
Operating the knob controls
as described below can cause
damage
to the
appliance:
• Switching on the burner without pressing
the control down.
• Switching on the burner by turning the
control clockwise.
• Switching the burner off by turning the
control anti-clockwise.
2. Lighting a burner
To light a burner, simply follow the steps:
1. Press the corresponding knob of the burner
you are about to use all the way in and,
then, turn it anti-clockwise until you reach
the ‘Strongest Flame’ symbol.
2. Keep the knob pressed in for a few seconds
after the flame ignites.