Platinum 10516871 Instruction Manual Download Page 2

1

ENGLISH

INTRODUCTION

Thank you for purchasing our “Platinum” Steam Iron. Each unit has been manufactured to ensure safety,
reliability, and easy of use. Before use, please read these instructions carefully and keep them for future
reference.

IMPORTANT SAFEGUARDS

When using your “Platinum” Steam Iron basic safety precautions should always be followed, including the
following:

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid hazard.

This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge concerning the use of this product,
unless they are supervised or have been given instruction concerning use of the appliance by a
person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Close supervision is required when any appliance is used near children or invalids.

This product is not for people who have sense or visual disabilities and lack of experience and
knowledge (including children) to use.

Always ensure that the voltage on the rating label corresponds to the voltage in your home.

Check the power cord and plug regularly for any damage. If the cord or the plug is damaged, it must
be replaced by the manufacturer or a qualified person in order to avoid an electrical hazard.

This appliance is intended for household use only.

Industrial or commercial use will void the

warranty, and the supplier can not be held responsible for injury or damage caused when using the
appliance for any other purpose than that intended.

Incorrect operation and improper use can damage the appliance and cause injury to the user.

Do not use the appliance if it has been dropped or damaged in any way. In case of damage, take
the unit in for examination and/or repair by an authorized service agent.

To reduce the risk of electric shock, do not immerse or expose the motor assembly, plug or the
power cord to water or any other liquid.

Never immerse the unit in water or any other liquid for cleaning purposes.

Remove the plug from the socket by gripping the plug. Do not pull on the cord to disconnect the
appliance. Always unplug the unit when not in use or before cleaning.

The use of accessory attachments that are not recommended or supplied by the manufacturer may
result in injuries, fire or electric shock.

Do not let the cord hang over the edge of a table or counter. Ensure that the cord is not in a position
where it can be pulled on inadvertently.

Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or electric burner
or in a heated oven. Please keep it in a cool and dry place away from direct sunshine.

Summary of Contents for 10516871


























Reviews: