Contact: [email protected] (888) 550-2410
Maximum Weight Allowance
•
The maximum weight allowance for the Envyy Bed is 500 pounds, distributed evenly
across the base.
•
Exceeding the recommended weight capacity of the bed could damage it and void the
warranty.
•
This product is not designed to support or lift this amount of weight in the head or foot
sections alone.
•
For the best use, consumers should enter and exit the bed in the lifted chair position or
in the flat (horizontal) position.
•
Avoid placing extra weight on the head or foot section of the base including when in the
raised position.
•
UL recognized components. CFR 1633 rated.
•
DO NOT STAND ON THE BED AT ANY TIME.
Troubleshooting
•
“I just received my bed and it isn’t turning on”
•
If your bed is not working upon set up, it just needs to be reset. To do this, first unplug
the bed from the wall. Wait ten seconds, then plug bed back into wall. Grab the remote
control and hold, “Lift Chair Down” for 30 seconds. The bed will start to move as it
resets. From there, you are good to go.
HAND CONTROL OPERATION
