Platinum CCTV PT-BF5421-T, Installation And Setup

Page: 30 / 41

Configuring Camera & Blackbody
1
2
3
1. Select [ Setting ] > [ Smart Thermal ] > [ Human Temperature Measurement ] > [ Smart Channel ]
2. Smart Channel: Visible light and Thermal imaging are the Options. In most instances, visible light is used to detect faces. If there is too much backlight or
not enough light, then you may wish to select thermal for face detection instead. Snap Angle Filter
：
The higher the value, the easier it is to capture a
face from the side. For example, when the value is 1, it will only detect a face from the front.
3. Click Save .
Enable Smart Plan
Configure
Blackbody
Set Body
Temp Rules
Smart
Channel
Settings
Temperature
Compensation
Settings
Video Target
Settings
Final Testing
Smart Channel Selection –
Visible or Thermal Image for face detection