Power Source
230 V ~50 Hz
Max. Rated Load
500 W 200 W
Power Consumption
approx 0,5 W
Detection Moving Speed
0,6 - 1,5 m/s
Detection Range
190°
Ambient Light
<3 - 2000 LUX (adjust)
Time Delay
Min 10 s ± 3 s
Max 7 min ± 2 min
Detection Distance
4 - 9 m < 24⁰C (adjust SENS)
Ingress Protection
IP20
Working Temperature
from -20 to +40⁰ C
Installation Height
1 - 1,8 m
Assembly type
concealed
Signal
infared (PIR)
Description
Assembly remarks
Technical Data
Manual
Motion sensor
Model: CR-IR2/KP/WHITE
Attention
Safety
Environment
Read this manual before using the device. In case of any problems with understanding its content, please contact the seller of the
device
The manufacturer is not responsible for damages that may result from incorrect installation or operation of the device.
Making independent repairs or modifications will void the warranty.
Due to the fact that the technical data are subject to constant modification, the manufacturer reserves the right to make changes
regarding the product characteristics and to introduce other design solutions that do not degrade the product's parameters and
performance.
Plastrol reserves the right to make changes to the manual.
1. The product is intended for indoor use
2. All operations should be performed with the power off
3. Do not cover the device during operation
4. Do not use the product when the housing is damaged
5. Use the device for its intended purpose
Produced after 29th July 2005 Waste electrical products should not be disposed with household waste. Please
recycle where facilities exist.
Check with Your Local Authority or retailer for recycling advice.
The product is used to control lighting or other devices when motion is detected. The receiver is activated using an infrared sensor
(PIR). It allows to turn on the lighting when detect movement of the object emitting heat. It remain on as long as the motion sensor
detects movement within the field of view. If no movement is detected within the set time, llighting or the other device is turned off
When choosing a mounting location, the following criteria should be taken into account:
Detection range
Installation Height
Contraindications regarding assembly
Do not install the device near heaters, fans and other objects where rapid temperature changes may occur;
Do not install the product in places where the sun's rays may fall directly on the motion sensor;
Do not install the product near objects that may move under the influence of wind: curtains, tall plants, etc.
Do not install the device in places where animal movement can be detected,
Security Rules
Make sure that the power cables have appropriate current protection in the form of appropriate fuses or other devices that
disconnect power in the event of overload,
If the temperature difference between the moving object and the environment is small (e.g. in summer), the sensor may
react later and its motion detection range will decrease.
Maintenance
Contamination of the sensor's optics reduces the range and sensitivity of motion detection
