PlasmaPart 200A MMA CI Operation & Safety Manual Download Page 7

Statement of warranty: 

PlasmaPart Limited hereby warrants to the original purchaser that new PlasmaPart 
machines sold are free from material defects and defective workmanship, should any failure 
arise within a period of five (5) years from the invoice date and the machine has been 
treated in accordance with the guidelines stated in this manual, PlasmaPart Limited will 
collect the machine, return it to working condition or replace it at our discretion and re-
deliver it to you as quickly a possible – typically within 48 hours. 

This warranty is in lieu of any warranty of merchantability or fitness for a particular purpose. 

Warranty period:

  

5 years

 parts and labour on power source 

1 year

 parts and labour on leads and clamps 

 

This warranty is conditional on you retaining the original packaging or being able to pack the 
machine so it can be transported safely by our delivery partner. If the machine is damaged 
in transit from you to us in the event of a warranty claim, you may be charged some of the 
repair costs if the machine has not been packaged adequately. 

 

The warranty explicitly excludes: 

 

 

Rods, Consumables, electrodes, nozzles, swirl rings, o-rings, fuses and filters 

 

Equipment that has been modified, improperly used or installed, misused or 
improperly operated according to the guidelines in this manual 

 

Limitation of liability: 

 

We shall not be liable or responsible for any injury, illness, accident, misfortune, loss of 
profit, loss of earnings, loss of life however caused as a result of buying and/or using or 
misusing the product(s). In no event shall PlasmaPart be liable or responsible to you or any 
third party for any personal, mental, physical injury or illness, consequential, direct, indirect, 
special or contingent damages arising from the use, misuse or failure of the product(s) sold 
or advice given. Our cumulative liability on account of a claimed defect in any product 
supplied by PlasmaPart or any damages of whatsoever type caused by the use or misuse of 
the products(s) shall in no event exceed the purchase price paid by you. 

Summary of Contents for 200A MMA CI











Reviews: