INTRODUCTION
The Plasma Air PA600 is a needlepoint brush type ionizer producing an
equal amount of positive and negative ions. This ionization equipment is
effective in reducing harmful pollutants and odors by introducing positive
and negative ions into the system airflow. This unit is highly versatile as it
may be installed in an air handling unit, fan coil unit, PTAC, heat pump and
even a ductless split system. The PA600 is self contained in a potted
enclosure which has molded flanges with mounting holes. Models are
available to accept 12V DC, 24V AC, 120V AC and 208 - 240V AC without
the use of an external power supply.
MECHANICAL INSTALLATION INSTRUCTIONS
GENERAL MOUNTING CRITERIA:
1.
Do not connect to power before mechanical installation is complete.
2.
Mount ionization unit to allow access for general maintenance.
3.
Mount the unit at or near the fan inlet using the holes in the mounting
flanges, ensuring that the air stream flows over the 2 brushes
simultaneously. See figures 1 & 2.
4.
The unit should be mounted downstream of the filter.
5.
For best results avoid locations directly after a cooling coil or humidifier.
LED INDICATOR LIGHT
POWER WIRES
IONIZATION BRUSHES
MOUNTING FLANGE
MOUNTING HOLE
A
IR
F
LO
W
FIGURE 1
FAN
DISCHARGE
FAN INLET
IN LINE 500 mA
GLASS CARTRIDGE FUSE
CONNECT
TO POWER
FIGURE 2
PA600
MOUNTING HOLES
