9
If you leave your headset powered on but out of range of your paired phone for more than 90
minutes, your headset will conserve its battery power by entering into a DeepSleep
™
mode.
Once back in range with your phone, tap the Call button to exit DeepSleep mode. If your
phone is also ringing, tap the Call button again to answer your call.
Your headset has an indicator light
that flashes in response to a change in status or after
a button press.
Some examples of what you will see are:
• Solid red until charging complete and then off
• Flashing red and white during pairing
• Triple red flash when less than 10 minutes of talk time
• Triple white flash at incoming call
Your headset tells you about status changes in English. For example:
• “Power on”
• “Pairing successful”
• “Talk time (x) hours”
• “Mute on”
• “Lost connection”
• “Recharge headset”
This headset only speaks and understands English. If you prefer to use the Call button
to answer or reject calls, you can disable the voice commands “Answer” or “Ignore.”
With the headset powered on, simultaneously press the Call and Volume buttons until
you see the indicator light flash white two times. Repeat these steps to reactivate
the commands.
Simply check the Headset battery meter on your iPhone (automatically displayed) or
Android smartphone (enabled by the MyHeadset
™
or Find Myheadset
™
apps)
Save power
Decipher the lights
Hear it whisper
Disable voice commands
Checking battery level
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
More features
