My headset does not
work with the DA80 I am
using on my PC. (I cannot
answer or disconnect
from the headset call
button.)
1
www.plantronics.com/media/downloads/
to ensure your softphone is compatible for
remote answer and disconnect.
2
When a PC goes into standby or hibernation, the USB audio processor is no
longer powered on. Be sure your PC is in an active state.
3
Be sure you have the Spokes software installed.
I cannot hear the caller.
1
The USB audio processor is not set as the default audio device. Use the
audio setting in Windows under Sounds and Audio Devices to select DA80
as the audio device.
2
Listening volume is too low. Press the volume up button on the headset.
Callers can not hear me.
1
Headset is muted. Press the mute button on the headset to unmute the
microphone.
2
Headset microphone boom aligned incorrectly. Align headset boom with
your mouth.
3
The USB audio processor is not set as the default audio device. Use the
audio setting in Windows under Sounds and Audio Devices to select DA80
as the audio device.
Sound in headset is
distorted. I can hear echo
in headset.
1
Lower the listen volume on your softphone until the distortion disappears.
2
Adjust volume on headset.
The other headset I was
using to listen to music
does not work any more.
1
The USB audio processor will set itself as the default audio device in
Windows. Use the audio setting in Windows under Sounds and Audio
Devices to change the device used for audio.
My headset stops
responding to button
presses.
1
When a PC goes into standby or hibernation, the USB audio processor is no
longer powered on. Be sure your PC is in an active state.
Troubleshooting
8
