INSTALLATION OF THE PLANMECA ETHERNET INTERFACE BOX TO THE PLANMECA PROLINE XC X-RAY
10 Planmeca Ethernet interface
Installation manual
Open then the Internet Explorer, insert the Planmeca Ethernet Interface default IP address
192.168.0.135
. Without this default IP Address you can not configurate your Ethernet Inter-
face.
In the appearing Ethernet Interface window select
Configurations
on your left-hand side. The
following window enables you to change the factory default IP Address and TCP Port. Con-
sult the local network administrator about the IP address settings you can use (in this exam-
ple
192.168.1.123
). After saving your configuration return to the Ethernet Interface window to
check your configuration.
Summary of Contents for Ethernet Interface
Page 26: ......