Planktovie FISHGUN D2, User Manual, Page: 7 / 16

Page 6 sur 15
Notching position
1
2
2
3
4
5
6 & 7
Tank volume
All volumes
All volumes
0.8 L
Tank brands
Techniplast
Pentair / Aquarius
Aquaneering
1.8 L & 6 L
2.8 L
9.5 L
Aquaneering
Aquaneering
Aquaneering
However, this new version of the Fishgun makes it possible to use it with any type
of aquarium (Aquaneering, Pentair, Techniplast).
A brand-new tube sliding system is now available so that the hole through which the
feed flows coincides with the hole on the aquarium cover regardless of the brand. This
tube sliding system consists o f detent marks on the tube and a metal lug on the tube
holder. With the help of the visual markings, you can easily slide the tube so that the
notch locks the tube in the correct position for the type of aquarium you have.
You can thus adjust the length of the diet-tube according to the type of aquarium you
own. Here is a table (table 2) of the most common brands, and the position of the
corresponding notch.
For optimal reading of the RFID code, it is important to position the RFID antenna on
the front of the FISHGUN D2 close to the NFC tag.
NOTE
: for the Aquaneering aquariums specifically, we provide RFID tag supports
allowing to certify the reading of the RFID tag by the scanner of the Fishgun. If you
have this type of aquarium whose frontage where the RFID tag must be stuck is in
bias, it is necessary to position a support of the tag in the front of your aquarium so
that the scanner is perfectly in front of the chip during the reading. These tag holders
are available on our website, and five units are available for purchase of a Fishgun D2.
Table 2 : The notching level for each aquarium
Position 1 = position closest to the dispensing port