Thank you for purchasing The Bumblebee. In this step by step tutorial we will show you how to
assemble the machine.
Before start:
Ensure that you work in a well ventilated area and that you have all the necessary
tools (soldering iron, solder, cutting pliers, etc.). If you have very little or no soldering experience
make a search on the www. There are many tutorials on how to solder.
We will start soldering the resistors. Take the BOM (Bill Of Materials) document and start with the
4R7 resistor. Put it in place, turn the PCB, solder and cut. Continue with the 1K resistors and so. Go
by groups, don't solder all the resistors at a time. If you don't know how to identify the different
resistors here you have a tip.
This is how the PCB will looks like after soldering all the resistors.
