29
envelope. Set the 2 pots at its minimum position and press the button.
While you have the button pressed the sound is ‘ON’. When you release the
button the sound is ‘OFF’. You’re using a fast
ATTACK
and
RELEASE
times and
the SUSTAIN is the main player here. No turn the
RELEASE
CW and listen. Do
the same with the
ATTACK
pot.
There are many ways to use the envelopes on
ANTS!
, not only in the
VCF
and VCAs. Some tips:
1.
MIX
both in the mixer and get a full ADSR envelope.
2.
MIX
it but invert the ASR in order to create rhythmic patterns. Trigger
them at the same time.
3. Use the
AD ENV 1
for the
VCF
and the
ASR ENV 2
for the
VCA2
in order
to design more detailed sounds.
4. Use them to modulate the LFOs.
5. Use them to modulate the oscillators.
6. Use one of them with the
VCA1
with an oscillator and send the resulting
signal to the
VCF
.
Create a bass drum with this simple patch:
The AD ENV 1 is modulating the
XTOSC·Y
tone and the
VCA2
. The tone of
the oscillators starts up with a very short ATTACK and then goes down,
Summary of Contents for ANTS!
Page 1: ...ANTS PLANKTON ELECTRONICS ...
Page 2: ......
