Planex GW-AP54PR, User Manual, Page: 35 / 41

31
Chapter5 Web Management
5
ņ
network error
Ň
screen will show on the screen. You can configure
GW-AP54PR
Ņ
s setting again via web page management through LAN
port of GW-AP54PR.
< IP Setup>
œ
IP Address: The default value is 192.168.100.100
œ
Subnet Mask: The default value is 255.255.255.0
œ
Default Gateway: The default value is 192.168.100.100
< Wireless Setup>
œ
SSID: This is SSID of office WLAN Router/Access Point that
GW-AP54PR want to connect to. The string length is 32 bytes.
œ
Channel: Set fixed channel or Auto.
ņ
Auto
Ň
means after power on
GW-AP54PR, it will scan all the wireless channels and select a clear
channel automatically.
œ
WEP : you can disable WEP key or select 64bit or 128bit in ASCII or
HEX string type.
œ
Key: If WEP is enabled, you have to set WEP Key value according to
WEP mode you selected. There are four Key Index for you to select.
<Apply >: press button to select this mode
<Cancel>: press button to abort action
<Back>: back to the operation mode main menu