4
FX-2116/2124TE
The product package should contain the following items:
●
FX-2116/2124TE Switching Hub
●
Serial cable
●
Power cable
●
Rack-mounting brackets
●
This User's Manual
If any item is found missing or damaged, please contact your local PCI
reseller or our technical support for assistance.
3
FX-2116/2124TE
●
Comply with IEEE802.3, IEEE802.3u and IEEE802.3ab standards
●
Provide two RJ-45 STP ports for 1000BASE-T/100BASE-TX/10BASE-T
connectivity
●
Provide 16/24 RJ-45 STP ports for 100BASE-TX/10BASE-T
connectivity
●
Fully support Auto-Negotiation: automatically detect the transfer speed
(1000/100/10Mbps) and duplex mode (half/full-duplex) (Note: The half
duplex mode is NOT supported at 1000Mbps)
●
Support Store-and-Forward switching scheme
●
The on-board MAC address table automatically learns up to 16,000 MAC
addresses
●
Equipped with a packet buffer (FX-2116TE: 8MB, FX-2124TE: 10MB)
●
Supports up to 26 VLAN groups (FX-2124TE): the FX-2116TE supports
up to 18 groups
●
Support Trunking, a technology which facilitates data transfer to a
maximum rate of 4,000Mbps between two Trunk-ready switches
●
Support Port Mirroring
●
Support 4-level port-based QoS
●
Support Flow Control (Full duplex: IEEE802.3x, Half Duplex: Back
Pressure)
●
Status LED°¶s display the operational condition of each port and that of
network
●
Auto MDI/MDI-X function automatically recognizes both straight and
cross-over cable types (1000BASE-T port only)
●
Rack-mountable to any standard 19" rack
●
Provides one serial port for configuring VLAN and other advanced
features
1
2
Features
1
3
Package Contents