Planex BLW-54MR User Manual Download | Manualshive

Page: 74 / 102

background image

Wireless Router User Guide

70

Login

Login Method

If your ISP does not use a login method (username, password) for
Internet access, leave this at the default value None (Direct connec-
tion). Otherwise, check the documentation from your ISP, select the
login method used, and enter the required data.

"

PPPoE - this is the most common login method, widely used
with DSL modems. Normally, your ISP will have provided some
software to connect and login. This software is no longer re-
quired, and should not be used.

"

PPPoE (Unnumbered IP) - this can only be used if your ISP
supports this system, and has allocated you multiple IP addresses.
If selected, you must also select "Specified IP Address" above
and enter one of the IP addresses allocated to you by your ISP.
The other IP addresses must be assigned to PCs on your LAN.

"

PPTP - this is mainly used in Europe. You need to know the
PPTP Server address as well as your name and password.

"

L2TP - this is not widely used. You need to know the PPTP
Server address as well as your name and password.

"

Big Pond Cable - for Australia only.

"

SingTel RAS - for Singapore only.

Login User Name

The User Name (or account name) provided by your ISP.

Login Password

Enter the password for the login name above.

RAS Plan

For SingTel customers only, select the RAS plan you are on.

Server Address

This is not required for PPPoE or SingTel RAS.

For PPTP, L2TP and BPA, enter the Server address as provided by
your ISP.

Connection
Behavior

Select the desired option:

"

Automatic Connect/Disconnect
An Internet connection is automatically made when required, and
disconnected when idle for the time period specified by the
"Auto-disconnect Idle Time-out".

"

Manual Connect/Disconnect
You must manually establish and terminate the connection.

"

Keep alive (maintain connection)
The connection will never be disconnected by this device. If dis-
connected by your ISP, the connection will be re-established
immediately. (However, this does not ensure that your Internet IP
address will remain unchanged.)

Auto-disconnect
Idle Time-out

This field has no effect unless using the Automatic Con-
nect/Disconnect setting.
If using this setting, enter the desired idle time-out period (in
minutes). After the connection to your ISP has been idle for this
time period, the connection will be terminated.

Buttons

Default

Inserts the default MAC address into the MAC address field. You
must click "Save" to actually change the address used.

«
...
72
73
74
75
76
...
»

Summary of Contents for BLW-54MR







































































































Reviews:

No comments

Related manuals for BLW-54MR

Brand: HAN Pages: 2

Brand: OBERON Pages: 2

Brand: Aruba Pages: 20

Brand: Ryobi Pages: 44

Brand: ICP DAS USA Pages: 61

Brand: TP-Link Pages: 2

Brand: TRENDnet Pages: 93

cnPilot E410 Indoor

Brand: Cambium Networks Pages: 52

Brand: Cisco Pages: 90

Brand: Kogan Pages: 16

Brand: wikango Pages: 20

Instant Wireless WAP54G

Brand: Linksys Pages: 67

Brand: ANTAIRA Pages: 70

Brand: JBL Pages: 17

Brand: Wireless Joey Pages: 20

COMMUNICATOR 1000C

Brand: Wireless Matrix Corporation Pages: 20

Brand: Unitronics Pages: 5

Brand: Gigafast Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands