■
If the result message is not displayed properly or you cannot connect to the Internet…
# Check whether the input mode/status of the data
1) Use the plain (non-hiragana/kana/kanji) alphanumeric characters to specify data.
2)Most of the parameters are case sensitive. 3)Check for ambiguous letters such as zero
(0) and o (O)
# Check the connection status
Turn off the power of all the devices attached as well as the product , and then wait for
about thirty minutes or one hour. Next, turn on their power again as shown in Section
1-2 about 30 minutes or 1 hour later.
Chapter 3 Setting Up WEP
This last chapter will describe how to adjust the WEP (wireless LAN security)
parameters of the product.
3-1 Configuring WEP Setting of the BLW-04GZ
1. Turn on your web browser.
< Click to start Netscape Navigator, or
<Click to start Internet Explorer>
2. Enter “192.168.1.1” in the address field of your browser.
#Netscape Navigator:
#Internet Explorer
23
