10
PLANETA
PLANET
PLANET
1861
Heben ohne Grenzen
– A geared trolley is powered by a reel chain which is pulled downwards either at
the right or at the left side. A push trolley does not have that. Take the advice of
PLANETA if you use the trolley hoist under heavy circumstances or environments,
because there could be special features necessary. Those circumstances could be:
– Dusty, greasy, acid containing areas
– Ocean climate or wet, salty areas
– Explosion dangered areas
– Food industry
– Extremely high or low temperatures.
– Move the trolley only by hand power.
– No fast moving or machinery powered drives are allowed for pushing or towing of
the geared trolley. Wheels and gears are made only for its originated purpose.
– Watch always the load when you drive the trolley.
– It sometimes happens that a load is too long or too wide to be lifted with one trolley
hoist only. So if you have to move this part and you have to use two trolleys at
each end, please chose the capacity of each trolley as big as the total weight of
the load. This prevents an accident when the load swings and one hoist could get
overloaded if too small.
6. Inspections, Repair and Maintenance
When you detect during the disassembling of your trolley that some parts are worn or
damaged, please replace them by original new parts. The name of the spare parts are
found in the spare parts list and the spare parts drawings which are attached some
pages later. Please mention the correct spare part number, the description and the
capacity of the trolley. If the parts are bolts please mention also fl ange width of your
beam for which the trolley was built. If you are in doubt, send defect part to us.
Bearings of trolley wheels are lifetime lubricated. You may grease the pinion and the
gear of wheel from time to time with gear grease.
