background image

4

1. Introduction

This Operation Manual shall provide you with the essential instructions to ensure 

safe and reliable operation of your hoist and trolley. The instructions stipulated in 

the Operation Manual do not substitute accident prevention regulations issued by 

professional associations and various regulations valid in the relevant countries, which 

may vary. The instructions stipulated in this operation manual must be learned and 

followed! In the course of adjustment to the European market the regulations of many 

countries have been substituted with the International Regulations.

However, the point of all these regulations is the same: 

Accident prevention!

On Industrial Safety And Health and The Directive 2006/42/EC Of The European 

Parliament And Of The Council 2006/42/EG (EG Machinery Directive). Please look to 

your health and safety rules of  your country.

We would like our devices to be safe and reliable aids. Therefore, we have devised 

these operating instructions for you. Please make these instructions accessible to 

the service and maintenance personnel! If these instructions are disregarded they 

are worthless. If you need more copies of this Manual we will send them to you 

with pleasure. Furthermore, you must follow these operating instructions to save 

unnecessary expense; faulty maintenance work, faulty operation or accidents due to 

disregard of instructions shall revoke our warranty and liability. To ensure operational 

safety, the repairs or modifications must only be carried out by the appropriately trained 

professionals using original parts. Installation and fitting of parts made by companies 

other than PLANETA presents a safety risk and voids all our warranties.

Our representatives and service workshops are always at your disposal. Please refer to 

your specialised dealer from whom you have purchased your hoisting equipment. You 

will find their details on the machine sticker or in your invoice. In case it is not possible 

to read these details we will be happy to help you if you provide us with the serial no. of 

the machine. Our emergency number in Germany:

02325-9580-0

To order original parts, please refer to the spare parts list supplied with this manual. 

Please ensure that all functions and are tested following maintenance or repair works 

prior to start of operation.

If you observe these instructions you will always be satisfied with your device.

BetrSichV, The German Law For Equipment And Production (GPSG), The Ordinance 

In the Federal Republic of G

ermany there are following important: The 

DGU

V and 

Please mind these regulations and warnings strictly! 

Summary of Contents for GTM

















Reviews: