XRT-401F
XRT-401F
their respective owners. Copyright © 2010 PLANET Technology Corp. All rights reserved.
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: 886-2-2219-9518
Fax: 886-2-2219-9528
Email: [email protected]
www.planet.com.tw
Quick Guide
Quick Guide
2010-B40110-000
VERIFY THE CONTENTS INSIDE PACKAGE BOX
The package should contain the items plus XRT-401F. If any item is missing or damaged, please contact the seller immediately
HARDWARE OUTLOOK
SYSTEM DEFAULT
CD-ROM
Quick Installation Guide
STEP 8. At the last step, it ask for the DNS IP
address, key in the DNS provided from your
ISP and click on Finish, then your XRT-401F
is ready to connect to the Internet.
STEP 4.
Bring up the Web Browser and in the Address
Field, key in
“http://192.168.0.1”
and the
Login page prompt for User name and Password.
Just key in
“admin”
for both.
STEP 3. Connect to the PC or Laptop
(DHCP client mode)
STEP 2. Connect to the xDSL modem / cable
modem
STEP 5. Click on
and follow the
Wizard for the step by step instruction.
STEP 7. WAN mode selection. Please check with
your ISP for the connection type.
Click on Manual if you already got the
information from your ISP.
After the Router Reboot, the status page will prompt you the
connection information as the example figure below. You can just check
the System Date (Network Time) to see if the Internet is on or not.
Now, your XRT-401F is ready for service and you can then check the
CD-ROM manual for more configurations to this Router.
Step 6. Choose your time zone of your location
and.
Next
Quick Setup
User name:
admin
Password:
admin
Default IP address:
192.168.0.1
DHCP Server:
Enable
DHCP IP pool:
192.168.0.2 ~ 192.168.0.100
Power Adpter
1
2
3
4
192.168.0.x
DHCP client
Laptop
PC
xDSL modem / Cable modem
3
4
WAN
RESET
12V DC
INSTALLATIONS
STEP 1. Connect the power
Power Adapter
http://192.168.0.1/
WAN & Per LAN
LED
Turn on for a good connection
Blink for data receiving / transmitting
Power:
Turns on
after powered
DC-Jack
For Router power system
Reset button
Reboot: One push and release
Factory Default: Hold the button for
10 seconds and release
WAN
Connect to the DSL
modem or cable modem
LAN 1 ~ 4
Connect to the LAN PCs
UTP Cable
