WSG-401 User Manual
41
Item
Default
Description
DNS Fake IP Reply
Enable
While Internet servers on your LAN such as proxy
server and SMTP server require IP addresses, it is
often not necessary to assign real IP addresses to
each end-user workstation on a LAN. NAT is the
process of assigning fake IP addresses to network
devices, then translating them into a real IP address
for Internet communication.
Layer 2 Isolation Security
Enable
If plug and play Internet access is selected, you can
enable Layer 2 Isolation Security function. When the
“
Layer 2 Isolation Security
”
enabled, everyone cannot
communicate with each other.
Secure administrator IP
Addresses
Any
Options: Any and Specify. User can specify 5 IP
addresses or a range to allow remote control access
from network.
Multicast Pass Through
Disable
This function allows for multiple transmissions to
specific recipients at same time.
Allow remote user to ping the
device
Enable
This function allows remote user to ping the
WSG-401 through Internet. Ping is normally used to
test the physical connection between two devices, to
ensure that everything is working correctly.
SSL Certificate
Default
Option: default or customize certificate, These are
two ways to create a certificate, one is purchase a
certificate from a certificate authority (Ex. Verisign or
Thawte), and another is creating a self-certificate (For
example: Uses OpenSSL tool).
Click
Apply
button to save the new settings.
Click
Apply
button, then Restart dialog box will appear. Click
Apply
to restart the system.
Figure 3-24 Restart Dialog Box
Summary of Contents for WSG-401
