4.5 Port Management
4.5.1 Port Configuration
This function is to configure and to view the configured port management status, port negotiation mode
and the port flow control function.
。
Management Status:
Display port status: Enable or Disable. Disable is to turn off the port.
。
Link Status: “Up”
to indicate the port is linked while
“Down”
to indicate the port is not connectd.
。
Speed:
Shows the negotiation mode and the running speed on the port.
。
Duplex:
Displays full-duplex or half-duplex mode.
。
Flow Control:
Display Flow status of port: Enable or Disable, Disable indicates Flow control is off.
。
Auto:
Display which mode the port is auto-negotiated
。
Config:
(configured) Displays the state defined by the user.
。
Atual:
Displays the negotiation result.
4.5.2 Port Statistics
The Port Statistics page provides a view of the current status of every port on the Switch.
Pressing the
“Reset”
button will reset all port counters to zero.
