Planet WSD-800 User Manual Download Page 26

Page: 26 / 66

4.4.3 Password

The

Password

management menu is to set or change the password of the Web Management Interface.

Click on

System/Password

menu button, and the

Modify Password

table shows in the main web page.

Enter

“old password “

“new password”

“confirm password”

Click

“OK”

to change the password.

4.4.4 CONSOLE

This function shows the connection parameters for the Console Management Interface. Click on the

System/CONSOLE

menu button, and the following table shows in the main page of the web.

4.4.5 System Upgrade

This function allows performing firmware update from the web interface.

Click on the

System/System Upgrade

menu button, and the following table shows in the main page of

the web.

Click

on the

“Browse”

button of the main page, the system would pop up the file selection menu to

choose firmware. Select on the firmware, and the

Update Status

would show the file upload status.

Summary of Contents for WSD-800



































































Search results

Summary of Contents for WSD-800

Reviews:

Related manuals for WSD-800

Brands by name

Popular brands

Planet WSD-800, User Manual

Search results

Summary of Contents for WSD-800

Reviews:

Related manuals for WSD-800

Brands by name

Popular brands