- 18 -
Note:
When selecting items in the table at the bottom, click anywhere in the item. The line is
selected, and the fields automatically load the item's parameters, which you can edit.
Protocol Filter:
Enables you to allow or deny Internet access to users based upon the
communications protocol of the origin. Click the radio button next to
Disabled
to disable the
protocol filter.
Allows:
All protocols in the list are allowed to connect to the Internet via the LAN.
(Create list items in section under Add Protocol Filter.)
Deny:
All protocols in the list are not allowed to connect to the Internet via the LAN.
(Create list items in section under Add Protocol Filter.)
Add Protocol Filter:
Use this section to create a profile for the protocol you want to permit
or deny Internet access to.
Enable:
Click to enable or disable the protocol filter.
Name:
Type a descriptive name for the protocol filter.
Protocol:
Select the protocol (TCP, UDP or ICMP) you want to allows/deny Internet
access to from the pull-down list.
Port Range:
If you are creating a profile for ICMP, type a minimum and maximum
port range in the two fields.
Apply to Group:
Select which user group you want to apply the profile to. You can
define the user groups in the User Group screen.
Add:
Click to add the protocol filter to the list at the bottom of the page.
Update:
Click to update information for the protocol filter, if you have changed any of
the fields.
Delete:
Select a filter profile from the table at the bottom of the list and click
Delete
to
remove the profile.
New:
Click “New” to erase all fields and enter new information.
