7
STEP 4:
Please use your PC to site survey the wireless
signal of WNRT-300, and connect your PC
with it wirelessly.
*Default SSID:
default
*Default Wireless Security:
No Security
Note
1. When the WNRT-300 is at Router Mode,
the only RJ-45 port will become a WAN
port. Therefore, you have to configure
it wirelessly. However, if you need to
configure the WNRT-300 by the UTP
cable, please switch it to AP Mode first.
And the RJ-45 port will become a LAN
port to be able to connect with your
computer. The incoming configuration
of AP Mode is the same as well with it
of Router Mode.
