21
4.5 Advance
The
Advance tab
enables you to configure more advanced setting, for example: power save
mode, preamble and etc.
Figure 4-22
Parameter
Description
Power Save Mode
The power saving function is only available when the network type is
in infrastructure.
Continuous Access
– The device will always set in active mode.
Max Power Save
– Enable the device in the power saving mode
when it is idle.
Preamble
The preamble defines the length of the CRC block of communication
among wireless devices. This option is only active in the Ad-Hoc
network.
Transmit Power
If you want to lower the transmit power of the device for saving the
power of the system, you can select the lower percentages from the
list. The lower power will cause the lower signal strength and the
coverage range.
There are four modes including Auto, High, Medium and Low.
Transmit Rate
There are several options including
Auto/1/2/5.5/6/9/12/18/24/36/48/54Mbps for you to select. When the
“Auto” is selected, the device will choose the most suitable
transmission rate automatically. The higher data rate you designated
