18
Chapter 4 Troubleshooting
ü
Why WAP-3000 and WL-8303 cannot work properly?
If you want the WAP-3000 to works with WL-8303, please set the data rate of WAP-3000 fixed to
11Mbps. Because the WAP-3000 chipset and WL-8303 are not fully compatible, you need to
make this setting for them to connect each other.
ü
How to create a new Ad-Hoc network with WL-8303?
If you want to create a new Ad-Hoc network with WL-8303, please add a new profile and
checked the setting
“
This is a computer-to-computer (ad hoc) network; wireless access points
are not used
”
of this profile. Then set this profile to default. When this setting is checked,
WL-8303 will work in Ad-Hoc mode. If unchecked, WL-8303 will work in Infrastructure mode.
