30
Fig4.9 Act as Master test station
The “Master Test Station” window contains the following status/ statistical information
during the Link Quality Test session:
¨
Slave / Test Address:
The physical address of the destination slave test station. (Self
physical address will be displayed while performing Access Point loopback test.)
¨
Packet Sent:
Total test packets have been sent.
¨
Packet Received:
Total responding packets have been received.
¨
Elapsed Time:
Total testing time.
¨
Signal level:
The signal level when receiving last responding packet. The signal level
is calculated as the percentage of its signal level measurement relative to the full
signal level.
2.
Act as Slave test station:
You can press [
Start
] button to start the slave test station. The ”Slave Test Station”
window will be displayed after pressing [
Start
] button.
The “Slave Test Station” window) contains following status/statistical information during
the Link Quality Test session: