6
4. Logon to the Console
Once the terminal has connected to the device, power on the WGSW Managed
Switch, the terminal will display that it is running testing procedures.
Then, the following message asks the login user name and password. The factory
default user name and password as following and the login screen in Figure 4-1
appears.
Login:
admin
Password:
admin
To have access to the full suite of commands, the operator must enter the
Privileged Mode. Enter
“enable”
to into the Privileged Mode and it requires
password authentication. From Privileged Mode, the operator can issue any Exec
command to enter the Global Configuration mode.
Command>
enable
User name:
admin
Password:
admin
Figure 4-1:
WGSW Managed Switch Console Login Screen
Note
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
face.