User’s Manual of WGSD-1022/WGSD-8000
- 260 –
Queue
5—6/36
Queue
6—6/36
Queue
7—6/36
Queue
8—6/36
Console (config-if)#
wrr-queue bandwidth
6 6 6 6 6 6 6 6
5.17.5 priority-queue out num-of-queues
The
priority-queue out num-of-queues
global configuration command enables the egress queues to be expedite queues. Use
the
no
form of this command to return to the default values.
Syntax
priority-queue out num-of-queues number-of-queues
no priority-queue out num-of-queues
number-of-queues
— Assign the number of queues to be expedite queues. The expedite queues would be the queues
with higher indexes. The range is 1 – 8.
Default Configuration
All queues are expedite queues.
Command Mode
Global Configuration mode
User Guidelines
When configuring the
priority-queue out num-of-queues
command, the weighted round robin (WRR) weight ratios are
affected because there are fewer queues participating in WRR.
Example
The following example sets queue 7, 8 to be an EF queue.
Console (config)#
priority-queue out num-of-queues
2
5.17.6 show qos interface
The
show qos interface
user EXEC command displays interface QoS data.
Syntax
show qos interface
[
ethernet interface-number
|
vlan vlan-id | port-channel number
] [
buffers | queuing | policers | shapers
]
ethernet interface-number
— Ethernet port number.
